No results found. Please check our inventory (displayed below) for equipment that would meet your needs.
Listing Number
Manufacturer
Model
Year
Number of Colors
Width
Description
Photo
More Info
1317
Allied
1B
Dec 1986
3
7"
Allied Gear 1B- 3 Color 7", 2 Die Stations, 1 Sheeting Station, 1 Removable Baseroll, 2 Product Rewinds, 1 Waste Rewind, Laminator, Razor Slitting, Tension Arm, Low Hours. Very Good Condition. Comes with approx. 50 Print Cylinders. Has new impression roll on it.
Allied Gear FM 2A 10 Inch 1990, 40-48 Inch Unwind Capacity, 9 Colors, Independent Dryers, Doctor Blades, Approximately 17 Anilox 200 - 800 Line, Web Turn Bar, UV on last print station, Laminator, 2 Waste Matrix Rewinds, 3 Die Slots
Sheeting Slot, RD Scorer, 2 Product Rewinds, Current owner has printed on supported film up to 25 mil P/P, Very Good Condition
1993 Allied Flexomaster 1B, 7", 3 Color Press, 2 Die Stations, 1 Sheeting Station, 2 Product Rewinds, 1 Waste Rewind, Constant Turn Anilox, Manuals, Can Be Seen In Operation.
Allied 100 series, 1994, 3 color, 10", 3 Die Stations, 2 Product Rewinds, 2 Waste Rewinds, Edge Guide, Laminator, Upgraded Heater Package (excellent for waterbased labels), in very good condition only 180 meter hours.
Allied Gear, Model 516, 1994, 16", 6 Color, with UV on the final station, 2 Product Rewinds, coming with all Anilox Rolls, Print Cylinders, and Strobe Light.
2002 Aquaflex HQX 2059 Prestige 20", 8 Color, Full 600 Watt, VTI, UV, 1/8 CP Gearing, Chill Drums, Bearer System on all Plate Rolls with 3 way Print Heads, 8 Dr. Blades in the press and 2 extras, 10 Anilox Rolls, 1 Die Station, 2 Web Guides, BST Promark Camera, Overhead Hoist for Hot Foil Unit. Electrical and Mechanical Set Up for Rotary Screen. Complete Crane System. Will do 1.5 mil film. 500 fpm.
2000 Aquaflex LXS 6 color press with varnish station and turnbar with power panel, Magpower TC5 & Digitrac 2 controller, Softal Electronic 6015, UV on the last station, Corona Treater, Electronic Sensing with auto tension/stop
Aquaflex LX1850 6 Color 18.5 " web width, Unwind Unit 42" (1067 mm) capacity including 6 core chuck, Electronic sensing web guide, Splicing table, Hydraulic roll lift, Magpower closed loop tension control system with electro magnetic brake, Corona treatment unit, 1 side (for non-conductive material) with frame, Variable infeed air nip roll station, Closed loop tension on variable infeed, Six (6) printing stations including laser engraved ceramic anilox roll and reverse angle doctor blade and ink pan, Six (6) inking drawers with anilox motor, fast set-up features for anilox cylinders, doctor blade and ink pan, Five (5) drying units including infra-red lamps, hot air blowing and suction, One (1) compo IR and UV Aetek, 1 lamp, 400 watt per inch, Six (6) enclosed doctor blades without peristaltic ink pumps (printing width is reduced by ¼"/6.35mm), Motorized register control for seven (7) units, Seven (7) 360 degree gear boxes for print and/or die stations,
Slitting station with 3 air shear knives and lateral adjustment, Outfeed air nip roll station, Sheeting and cross perforation station for top cutting, Unwind Lamination, low tension type, 24" (610 mm) capacity, 3" (76 mm) core chuck, manual tension control with magnetic brake and lateral adjustment, Chill roll module for U.V. lamination, including 16" (406 mm) chill roll, frame, UV curing mounting bracket (without chiller and dryer), Motorized dual rewind 30" (762 mm) capacity, 3" (76 mm) core chuck with automatic tension control upgrade, Walkways,
Predetermined electronic counter, Drying package for non-absorbent material including high capacity dryers with blast gates, manifold duct from blowers to the press, variable infra-red lamps with potentiometer on each unit and chromed impression rolls for six (6) print units, Closed loop temperature control (hot air). Gearing 1/8", CP-20 PA, Volts 240, PH-3, HZ-60,
Aquaflex Instaflex QX1608, 1997, 16" 8 color, 2 Product Rewinds, 1 Waste Rewind, Web Cleaner, Iran Hot Air Drying, Laminating, Hydraulic Roll Lift, 2 Anilox Station Roll Cart, IR Drying, 132 Print Cylinders, 35 Anilox Rolls. Only 9300 hours 8 Dr. Blade Assy, 4 New Dr. Blade Assy. Made to run film.
Aquaflex LX 1658, 16", 7 color, Full UV, Reversing 1st Print Station, 2 Die Stations, 1 Sheeting Station, 2 Waste Rewinds, 1 Product Rewind, Stacker, Hoist Over Die Stations, 360 Register Control, Laminating, Turn Bar, Delam Relam Unit, Video Inspection, Dr Blades.
No
1726
Aquaflex 1000
Instaprep
2002
10
10"
2002 Aquaflex Instaprep 1000, 10", 10 colors, 10 Drying Units, 8 UV Curing Units, Variable Infeed Air Nip Roll Station, Middle Air Nip Roll Station, Middle Web Guide, Cold Lamination Unit, Delamination and Relamination Unit, Additional Individual Vertical Die Cutting Station, Slitting Station, 2 Die Adapters, 2 Die Adapter Cassettes, Outfeed Air Nip Roll Station, 1 Sheeting and Cross Perf Station, Waste Rewind, Dual, Rewind Unit, Predetermined Electronic Counter, Motorized Register Controls for 11 units, 11 360 degree Gear Boxes, Turnbar, Motorized Shingling Conveyor with Counter and Handling Cart, 2 BST Promark PowerScope Video Web Inspection Unit, Unwind Unit, One Blank Frame Module, Infeed Closed Loop Upgrade, Conveyor Upgrade, Free Standing Lamination Station, 10 Additional Linking Cassettes with Dr Blades, 2 Inking Carts with Anilox Motor, 1 Video Plate Mounter, 1 Die Cart, Waste Removal System, 25 hsp Compressor, Refrigeration Unit, Step Up & Step Down Transformer, Quick Change with Anilox Cart and Die Cart, 223 Plate Cylinders with Gauges,
No
1453
Arpeco
Impressionist
6
13 1/2"
Arpeco Impressionist 131/2", 6 Color Printing Press, with 48" O.D. Primary unwind, Built-in Roll Lifter, 3" Air Loaded Mandrel, Automatic Compensating Tension Control, A B Kelva Web Cleaner, Softal Corona Treater with 2 Heads (to treat either conductive or nonconductive substrates), 6 printing stations with Automatic Throw-offs, 360 Degree Running Register Adjustment at each station, Remote Running Register Adjustment at Sheeting Station, Removable Ink Trays with Built-in Doctor Blade Assemblies. 3 Die Stations with Removable Anvil Rolls, Individual Register Controls, 8 3/4" Die Station Insert (to run narrower dies), 500 lb. Dayton overhead electric crane. One Sheeting Station with removable anvil roll, Air knife slitting, Belt Stacker (with top or bottom stacking). Laminating station with side to side adjustment and manual tension control. 1 triangular three bar turn-bar (lower). 1 Waste Removal station with capstan roll, matrix rewind roll with automatic tension control, numerous stripping configurations, Praxair anilox rolls (various line counts). Coming 6 anilox rolls in the press and 8 spares. 1 112.5 KVA Transformer. In addition, there are approximately 150 print cylinders along with numerous die cutters, butt cutters, perfs and sheeters included. Must sell. Make an offer.
1999 Comco Proglide Carton Press - 13", 5 Print Stations for Water Based Inks with Enclosed Chamber Dr. Blade System (Harris & Bruno), Viscosity Control: Opti Color Digital, Impinged Hot Air Drying, Ink Pumps, 3 Die Stations, Infeed: Martin MPS Butt Splicer with 6" core dia. reel 50" (valued at 100K),Comco Tension Control, Outfeed after die station, (folding cartons go to a single conveyor and waste goes to chopper), Extra's include Ink Pump Cleaner, Mounting Table, Waste Water Cleaning, Noise Reduction, Chopper for Carton Waste, 18 Anilox Rollers, 99 Print Cylinders
1998 Comco Chill Drum/Flexopack Press, 9 Colors, 22" Wide, Roll Lift On Unwind, Electronic Web Guide, Dancer -Controlled Brake, Switch-Operated Air Core Chuck 3", Soft Tension Unwind Station, Infeed Tension Control 5-1/4" Style, Sensor For Transparent Material, Doyle Web Cleaner (Dual Sided), Corotec Corona Treater (Dual Sided), Digital Readout For Infeed, Doctor Blade Assemblies, 360 Degree Registration, Automatic Register Control, Pro-Glide Shuttle Deck Print Unit Feature On All 9 Print Stations, Nip Rolls For Impression Cylinders, UVT UV Lamps On All 9 Stations, 10 Ton Water Chiller, 3 Die Cassettes, Exit Pacing Unit, Soft Tension Laminating Station, Air Operated Nip Roll On Chill Drum, Economy Score Knife Slitting Unit, Promark Handy Scan - 14" Screen, Automatic Register Control, Web Turnbar.
18" Comco Pro-Glide MSP in excellent condition under 3,000 hours. 6 chill drum MSP print modules with Pro-Glide shuttle deck PG1 doctor blade assemblies, ceramic anilox rolls, 3 low friction plasma coated idlers, 360 degree running registration, auto register control, unwind module with roll lift 40" dia, electric web guide, dancer controlled brake, 30" dia. for film substrates, heavy duty web guide, web cleaner, 50 Hz upgrade, corona treater (SOA) #1 reversing print head with doctor blade & ink pump, 2 position cassette die base extra die cassette with hydraulic hold downs, extra die cart, servo plateroll feature (5) includes variprint & reinsertion, 1 sheeting station, 4 400 watt UV's and 2 600 watt UV's, infeed tension control with digital readout, 5-1/4" dia. idler rolls, remote diagnostic feature, outfeed and sheeting cassette module includes sheeting cassette, die cart, auto register, exit pacing unit, digital readout for outfeed web tension. 32" repeat.
Gallus R160, 4 Color, 7", 7.5 Ton Chiller, Flat Bed Emboss/ Die Cut Unit, Includes Roto-Screen Making and Mounting Equipment, Large Assortment of Gears and Ring Sets
Gallus R250 Letterpress - 8 Letterpress units, 1 UV Varnish unit (flexo), 3 Die Cutting units, 1 Web Turnbar, 3 Gallus shutter type UV Lamps & 6 chain driven UV, 1 Bobst S2100 Auto Registration System. Can be seen in operation.
Gallus R250 Letterpress - 6 Letterpress units, 1 Flexo unit, 1 UV Varnish unit (flexo), 2 Die Cutting units, 8 UV Tech Lamps, 1 Bobst S2100 Auto Registration System. Can be seen in operation.
No
1514
Gallus Letterpress
R250
1985
8
10"
Gallus R250 Letterpress - 6 Letterpress units, 1 Flexo unit, 1 UV Varnish unit, 2 Die Cutting, 8 UVT UV Lamps, Bobst S2100 Auto Registration.
Manhasset 6" 3 Color, 2 Die Stations, Single Product, Single Waste Rewinds, Fife Web Guide.
No
1627
Manhassett
10"
1988
7
10"
Manhasset 7 color, 10" press, 4 new 600 BCM Anilox Rolls, 4 new Meter rolls, press has been completely rebuilt with all new bearings, many print cylinders, Rotary Hot Stamp, 25 New IR Lamps ($1,000) still in the box, , coming with a 80 CFM Compair Hydravane Air Compressor. Great press for line work. 81 Print Cylinders, 23 mix of Meter Rolls, Anilox & Anvils.
Mark Andy 1974, 4110 7" Press, 4 Color, 1/8 Gearing, Laminating, Edge Guide, 5 Die Stations, 2 Product Rewind, 2 Waste Rewind. This is a great press for basic 1 or 2 color work.
No
1482
Mark Andy
2100
1987
6
7"
1987 Mark Andy 2100, 6 Colors, 7", 3 Die Stations, 1 Sheeting Station, Conveyor, Laminating, UV, Turnbar, Brand New Drive Motor, RD Scorer, 2 Product, 2 Waste, Dr. Blades, Ceramic Anilox.
3 Mark Andy Presses in Good Condition. 2 Mark Andy 810's and 1 Mark Andy 820. All Machines Have 3 Colors, 7" Wide, 1/8 Gearing, 3" Unwind Diameter, 3" Rewind Diameter, 2 Waste Rewinds and 2 Product Rewinds.
1985 Mark Andy 4300 Letter Press 10", 5 Colors Plus 1 UV Flexo Station, UV On All 5 Stations, 4 Die Stations, 1 Sheeting Station, Stacker/Conveyor, 1/8 Gearing, 2 Waste Rewinds, 2 Product Rewinds, Lamination Station, Coming with Various Print Cylinders and Dies, Also with a Mark Andy Platemounter PM-160.
1984 Mark Andy 2100, 7", 6 Color Press, With 4 Die Stations, 1/8 Gearing, 2 Product Rewinds, 2 Waste Rewinds, Sheeter, Laminator, Edge Guide, Air Knife Slitting, Turnbar, Constant Turn Anilox, Can Be Seen In Operation, In Good Condition. Newer 2 Lamp Head UVT UV System, approx 200 Print Cylinders & approx. 6 Anilox.
1989 Mark Andy 2100, 7", 6 color Press, With UV On The Final Station, 4 Die Stations, Tension Control, 2 Product Rewinds, 2 Waste Rewinds, Crush Cut Slitting, 60 Print Cylinders, 12 Ceramic Anilox Rolls, 1 Magnetic Die.
Mark Andy 4200, 16", 8 Color Press, With 3 Die Stations, 1 Waste Rewind, 2 Product Rewinds, Slitting Station, Sheeter, UV Technologies UV Curing Unit, Mark Andy 4200 System CNC Line Controls, 3-15 Mil Stock Capacity, 24" Maximum Print Repeat, 40" Unwind With Edge Guide, 360 Degree Registration in the Die Station 50-500 FPM. Comes with one set of anilox and one set of print cylinders.
Mark Andy 2200 8 color with UV, Year: 2001, Web width: 17", 431mm, Corona treater, Infeed, 2 die cutting stations, 1 Sheeting Station, Sheeting table,
Laminating shaft, 1 Product Rewind, 1 Waste Rewind, Can be seen running, available immediately.
1985 Mark Andy 4300 Letterpress, 10", 6 Letterpress + 1 Flexo UV, 3 Die Stations, 3 Removable Baserolls, 2 Product Rewinds, 2 Waste Rewinds, Laminator, Edge Guide, Turnbar, Manuals, Can Be Seen In Operation, Coming With 420 Print Cylinders, Plates Machine (Water Wash), Spare Parts and Inks.
No
1732
Mark Andy
820
3
16"
Mark Andy 820, 16", 3 Color Press, 3 Die Stations, 2 Product Rewinds, 1 Waste Rewind, Edge Guide, Laminator.
1992 Mark Andy 830 Press, 7" Web Width, 1/8 gearing, 2 Die Stations & 1 Sheeting Station, 2 Product Rewinds, 1 Waste Rewind, Laminator, Turnbar. Only 3500 Meter Hours on it.
No
1703
Markem
LP-375
1986
3.75"
Markem Hot Stamp/Embossing, LP-375, Excellent Condition.
1999 Nilpeter FA2400 - 7 Color 8.5" web width, 3 Die Stations (2 complete, 1 without an anvil), 7 Removable Baserolls, Single Product, Single Waste, 7 Nilpeter UV's, Laminator, Edge Guide, Constant Turn Anilox, 7 Hot Air Dryers, Rotary Hotfoil Unit, 82+ Print Cylinders.
Nilpeter B-200, 1991 8 Color, with 6 Letter Press Stations and 2 Flexo Station, 2 Die Stations, 1 Sheeting Station, Infeed Tension, 1 Product Rewind, 1 Waste Rewind, approx. 200 print cylinders coming with this press. Price includes De-Installation, Rigging and Loading of the equipment. Priced for fast sale. ONLY $55,000 USD
Nilpeter Model F 2400, 6 Color, 3 Die Stations, 1 Sheeting Station, Edge Guide, Single Product Rewind, Single Waste Rewind, UV on final station, Dr. Blades, approx. 39 Print Cylinders, BST Video Inspection, in good condition and ready to ship.
No
1427
Nilpeter Letter/Flexo
B200
8
7 3/4"
Nilpeter B200, 8 Color, 3 Die Station, 1 Sheeting Station, 6 UV Letterpress Stations, 2 UV Flexo Stations, Various Plate Rolls and Gears.
Propheteer 1300 HD 1999 6 Color With UV Single Product, Single Waste, Graphic Vision Video Inspection, Foil Printing Unit, Rotary Die Cut Unit Video Plate Mounter, Excellent Condition.
Propheteer 1000, 8 color, Double Lamp UV, 3 Die Stations, 1 Sheeting Station, Rotary Screen Head between Stations 6 and 7, Automatic Tension control, Stacker, Video Inspection, Dr. Blade on each Station, infeed Pacing Roll. Coming with 322 Print Cylinders. Available to ship immediately. List of Cylinders sizes available.
Propheteer 6 Color, 7" Presses (3) with UV, 2 Product Rewinds, 2 Waste Rewinds, Laminating, 3 Die Stations, 1 Sheeting Station, Stacker, Turn Bar, Also a 4 Color 7" Propheteer and a 3 Color 7" Propheteer with the same standards.
Propheteer 700, 1983, 7", 4 color, 3 Die Stations 1 Sheeting Station, 2 Waste Rewinds, 1 Product Rewind, Laminator, in very good condition.
No
1731
Propheteer
700
4
7"
Propheteer 700, 7" 4 Color Press with 4 Die Stations, 4 Removable Baserolls, 1/8 Pitch Gearing, 1 Product Rewind, 2 Waste Rewinds, Laminator, Edge Guide, Turnbar, Well Maintained By Maintenance Staff, Press Comes With Extra Tooling At An Additional Cost.
1988 10", 8 Color Rotopress Model 2002, 1/8 Gearing, Automatic Throws/Constant Turn Anilox Rolls, 2 Product Rewinds, 30" Rewind Diameter, 1 Waste Rewind, 1 Unwind, 40" Unwind Diameter, 3 Die Stations, 24.000" Die Repeat, 3 Removable Base Rolls, 1 Sheeting Station, 1 Edge Guide, 1 Turn-bar, 1 Brewer 300-WPI Double-Lamp UV unit, Integrated Roll Lifter, Great Condition, Recently Rebuilt. Running Hours: 6400. Anilox and Meter rolls compatible with all current Nilpeter FB2500 Presses and Roto Press Model 3510, 3502. Press has extra ink pans, non-reservoir and reservoir style with circulation pumps, 8 Doctor Blades, can be seen in operation.
Sanjo Rotary UV Letter Press 1986 10" 6 Color plus UV Flood Coating Station 1/8 Gearing, 2 Die Station with Die Adaptor for 7" Dies, Video Inspection Unit. 1 Sheeting Station, 2 Waste Rewinds, Single Product Rewind, Also comes with Approximately 215 Print Cylinders,50+ Dies, Plate Making Machine for Letter Press Plates, 12 X15, Extra Drum and Gear, Ghosting Unit.
1983 Sanki 250, 10" Rotary Letterpress, 7 Color, 3 Die Stations, 1 Sheeting Station With Stacker, 40" Unwind, 27" Rewind, 7 Lamp OCR Curing System, BST Promark Handy Scan Video System, Rotometrics Underscore Unit Mounted Below Die Stations, 2 Web Guides, One Pre-print And One Pre-die Station, Press Has Secondary Unwind To Do UV Lamination With Nip Attachment After 7th Station, 7th Station Can Run As Letterpress Or Flexo.
Unitron Press Late 1970's 3 Color 8" Press, Stacker, 4 Die Stations, 2 Waste Rewinds, 2 Product Rewinds, Coming with Many Print Cylinders & Gears. Press Runs Daily Print Stations Complete but not used. This press is used for Die Cutting.
Webtron 650, 4 color, 3 Die Stations, 1 Sheeter Station, Laminating, 2 4 Way heads, 1 Ink Pump, 2 Mini Out Board Supports, Turn Bar, 2 Waste rewinds, 2 Product Rewinds, Coming with a Webtron Plate Mounter, and a lot of misc. parts.
1980 Webtron 650, 5 Color, With Edge Guide, Laminator, Constant Turn Anilox, Slitting, 4 Die Stations, 4 Removable Baserolls, 2 Product Rewinds, 2 Waste Rewinds, Can Be Seen In Operation.
Webtron 650, 4 Color, 6.5" Press, 3 Die Stations, 1 Sheeting Station, Homemade UV On The Final Station, comes with RD Scorer Unit, and baserolls. Can Be Seen In Operation.
Color Flexographic Press. 20' wide web, 24' Repeat, 1/8" cp gearing, 3" Teflon coated idler rolls, standard forced air drying, 40' unwind & rewind, prints on 3mil to 16pt material. Extra’s that are on the press or have been added to the press are a Accu-guide web guide, 3" Aetek Fusion UV units model# UPW23024, Hurletron electronic register system with touch screen control windows 98, BST Promark video scan inspection station, 2 - heavy duty Webtron die cutting units with equalizers, 1- Webtron Sheeter/Perf unit station, Corona Treater, 20" Sheeter/stacker unit, rotary shear knife unit, Retroflex enclosed chamber dr. blades w/pumps, Turn bar unit. Accessories, 31 Rotary dies from 13" to 20" wide
130 Print Cylinders - 23 different repeat sizes, 31 Different Anilox rolls – 180L up to 1,000 Line, Auxiliary Equipment available for an additional price: Mark Andy PM 200 Video-Mount Plate mounting system, Purchased Feb. 2005, Miscellaneous Equipment, OEM stainless steel ink pans & Dr. Blade units 2 new base rolls, 2 used base rolls, 1 new ink metering roller.
Webtron 650 6 color, single waste rewind, single product rewind, 3 die stations, 1 sheeting station, laminating tower, strobe, in very good condition coming with a 90 day warranty on parts.
Webtron 1000. 8 color, 162 print cyls, and 14 anilox. The crane does not go with the press. Has cool roll, turn bar, stacker, UV in last station,1125 die & sheeter stations (3 die stations and a sheeter station), 2 waste rewinds ,lamination station, Pro mark inspection camera, 40" unwind w/roll lift, and 40" product rewind.
Webtron 1000, 5 color, 1988, Single Product Rewind, Single Waste Rewind, 2 Die Stations, 1 Sheeting Station, Webcleaner, Dr. Blades,Stacker, in good condition, last serviced in 2007, anilox rolls are 800 line and a 440 on the varnish station. Comes with B Bunch Fanfolder.
Webtron 1000 7 Color, 10" Press - Full UV and Hot Air Drying, 1992, Dual Gearing, 7 Print Stations with 360 Degree Running Register Control, Space between 6 & 7 Print Station for a Screen Head, Telstar Screen Head & Accessories, Strobe Lamps behind each Print Head, 40" Unwind with Edge Guide, Laminating Head with Wind Up, Chill Roll before First Die Station, 2 Die Positions includes Anvil, Hold Down, & Bridge, Sheeting Table (Shingle Type) with Batch Counter, 1 Unilux Strobe after the Die Station, Crush Cut Slitting, 1 Product Rewind. Comes with 9 Meter Rolls, 20 Anilox, 15 Ink Pans, 70 Print Cylinders with Bearers, Exhaust Fan & Plenum for UV, Spare Parts - Electrical and Mechanical.
Wolverine Flexographic Printing Press (Stack Press) Model 41C - 6 color, 50" unwind and rewind dia., 3 die stations, edge guide, ink pumps, 1/4 gearing. Can be seen in operation.
No
2134
Arpeco
Inspector/Rewinder
80's
13"
1980's Arpeco 13", Inspector/Rewinder, Very Good Condition, New Electric Brake, New Clutches and Air Regulators, etc.
1989 Arsoma TR450, 5 Spindle Turret Rewinder, 16" Wide, With 3" Core Sizes, Auto Core and Tail Glue. Updated with AC motor and drive. Rebuilt with New Drive and New Clutches.
Aztech BSR2X, 16", Slitter Rewinder, 2006, ET Electronic Tension Control Drive System, 30-Inch Diameter Unwind Station (Will handle up to 40-Inch, Job Dependent), Ultrasonic Web Guide, (1) 3-Inch Pneumatic Rewind Spindle with 24-Inch Max. Roll Diameter, 750 Feet/Minute Web Speed (Job Dependent)
Articulating Operator Control Panel, Programmable Increment Counter, in good condition.
Webtron 1000 Print Station, No Heater Box, Completely Rebuilt, and will be painted to match your press.
No
3008
Webtron 5 HP Drive
750
NEW
Still in the box (new) made by CMC
No
3017
Webtron Accessories 32dp
650
6 1/2
Webtron 8000 Plate Mounter, 35 Dies all tested 3 or 4 New all cut no problem, approximately 144 Print Cylinders in good condition, many in excellent condition. 1 set 5 or 6 Scorer Wheels, Box of over 100 various Die Gears.
No
3024
Webtron Plate Mounter
8000 (4)
6 1/2"
Webtron 650 Plate Mounters 4 available, would like to sell as a package for special pricing.
No
3030
Webtron Unwind Stand
New Style
7 1/2"
Webtron 650/750 Unwind new style in good condition.
No
4064
4th color Add on Print Station
7"
7"
7" 4th Color Add on Print Station (4 available)
No
4065
4th Color Add on Print Station
10"
10"
10" 4th Color Add on Print Station (3 available)
No
4053
Comco
Print Cylinders
16" - 18"
Approximately 170 Comco Print Cylinders, 16" and 18". List Is Available.
No
4062
Die Station
7"
7"
3 - 7" Die Stations available for the Mark Andy 800 series presses
American Die Tech Back Slitter / Scorer Unit, 13", 6 Blades, 1 Year of Use.
No
5127
Anderson & Vreeland
Washout Unit
30" X 40"
Anderson & Vreeland Washout Unit, Reconditioned in 1999, Osolating Drum in Excellent Condition. Solvent.
No
5117
Anderson & Vreeland Complete Platemaking System
4 to 5 Years Old
A&V Platemaker, Alan Imagesetter, Alan Rip & Film Processor - Complete package of 4 pieces of equipment. Variable resolutions from 600 dpi to 2400 dpi, 18 x 25 width. This is Alan Flex Setter 400 and a Ripit RIP from Pitman top of the line imagesetter. Fast and accurate. Very clean 4 or 5 years old. Not in use, nicely stored. Unit keep in clean office environment. Also serviced by Agfa and Pitman techs. No problems, recently cleaned and checked - reliable machine. Solvent Washout.
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}