UV Power Supplies
The state-of-the-art in power supplies and operation controls.
H.C. Miller Press offers a comprehensive selection of power supplies
and operator control panels to meet a variety of commercial needs.
Our state-of-the-art ballast control feature maintains consistent
power levels regardless of minor voltage irregularities or ambient
temperature fluctuations. Available in both 50 and 60 hertz models
and various voltages, all components are UL, CSA, and CE approved
for the highest quality and design.
The Spectracure™ Series 3000 Command Center is a logic-based
relay system with 3 three manual power settings and a remote operator
control panel. It is equipped with a two position damper linked
with an RTD sensor to an Analog Exhaust Temperature controller.
These interlinked components maintain constant and accurate lamp
temperatures. The system is built performance tough and is very
cost efficient. The 3000 Series comes in single and a double configurations.
The Spectracure™ Series 4000 Command Center was especially
designed for the Narrow Web flexo market where presses are equipped
with UV interface options. These presses already have connections
available, to which we can interface with features such as shutter
operation signal with real press speed and auto power ramping. The
logic-based relay system has three power settings and remote control
found on the 3000 series as well as a manual cool down mode and
an emergency stop. The 4000 Series has the cooling capabilities of
the 5000 Series with a digital thermostat and an auto damper temperature
feedback cooling system. The 4000 Series also comes in single and
a double lamp configurations.
The Spectracure™ Series 5000 Command Center is the thoroughbred
of our systems. The 5000 series standard PLC controls provide for
easy changes to the lamp operating system. Program set-up parameters
facilitate the operator/equipment interface, and a remote touch-screen
interface is standard on multi-lamp systems. The 5000 Series comes
equipped with the digital thermostat and auto damper temperatures
feedback cooling system to preserve optimal substrate temperatures.
