Aquaflex Instaflex QX1608, 1997, 16" 8 color, 2 Product Rewinds, 1 Waste Rewind, Web Cleaner, Iran Hot Air Drying, Laminating, Hydraulic Roll Lift, 2 Anilox Station Roll Cart, IR Drying, 132 Print Cylinders, 35 Anilox Rolls. Only 9300 hours 8 Dr. Blade Assy, 4 New Dr. Blade Assy. Made to run film.
2000 Aquaflex LXS 6 color press with varnish station and turnbar with power panel, Magpower TC5 & Digitrac 2 controller, Softal Electronic 6015, UV on the last station, Corona Treater, Electronic Sensing with auto tension/stop
Aquaflex LX1850 6 Color 18.5 " web width, Unwind Unit 42" (1067 mm) capacity including 6 core chuck, Electronic sensing web guide, Splicing table, Hydraulic roll lift, Magpower closed loop tension control system with electro magnetic brake, Corona treatment unit, 1 side (for non-conductive material) with frame, Variable infeed air nip roll station, Closed loop tension on variable infeed, Six (6) printing stations including laser engraved ceramic anilox roll and reverse angle doctor blade and ink pan, Six (6) inking drawers with anilox motor, fast set-up features for anilox cylinders, doctor blade and ink pan, Five (5) drying units including infra-red lamps, hot air blowing and suction, One (1) compo IR and UV Aetek, 1 lamp, 400 watt per inch, Six (6) enclosed doctor blades without peristaltic ink pumps (printing width is reduced by ¼"/6.35mm), Motorized register control for seven (7) units, Seven (7) 360 degree gear boxes for print and/or die stations,
Slitting station with 3 air shear knives and lateral adjustment, Outfeed air nip roll station, Sheeting and cross perforation station for top cutting, Unwind Lamination, low tension type, 24" (610 mm) capacity, 3" (76 mm) core chuck, manual tension control with magnetic brake and lateral adjustment, Chill roll module for U.V. lamination, including 16" (406 mm) chill roll, frame, UV curing mounting bracket (without chiller and dryer), Motorized dual rewind 30" (762 mm) capacity, 3" (76 mm) core chuck with automatic tension control upgrade, Walkways,
Predetermined electronic counter, Drying package for non-absorbent material including high capacity dryers with blast gates, manifold duct from blowers to the press, variable infra-red lamps with potentiometer on each unit and chromed impression rolls for six (6) print units, Closed loop temperature control (hot air). Gearing 1/8", CP-20 PA, Volts 240, PH-3, HZ-60,
2002 Aquaflex HQX 2059 Prestige 20", 8 Color, Full 600 Watt, VTI, UV, 1/8 CP Gearing, Chill Drums, Bearer System on all Plate Rolls with 3 way Print Heads, 8 Dr. Blades in the press and 2 extras, 10 Anilox Rolls, 1 Die Station, 2 Web Guides, BST Promark Camera, Overhead Hoist for Hot Foil Unit. Electrical and Mechanical Set Up for Rotary Screen. Complete Crane System. Will do 1.5 mil film. 500 fpm.
All equipment listing information is provided by the seller and is believed to be accurate. H.C. Miller Press is not responsible for incorrect information.
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}